Rifton E760 Product Manual Download Page 7

7

Accessories

Tray

To attach the tray to the chair, slide it over 
the armrests until both latches engage in 
the holes in the armrests.

 WARNING

The tray is not designed to hold a 
child in the chair. Always use the 
straps and supports to secure child.

Hand Anchor 

 

Recommended use

A hand Anchor can be used on the Toddler 
Chair tray. It gives the child an anchor 
to control excessive movement of the 
arms and encourages stabilization of the 
shoulder girdle. The child may hold on with 
both hands for stabilization training or with 
one hand.

Operation

On a clean smooth Rifton table or tray, 
press down on suction cup of Hand 
Anchor and turn handhold clockwise 
until secure. To remove, turn handhold 
counterclockwise.

 WARNING

•  This accessory is intended 

for use on Rifton trays only 
and is not to be used as a primary 
support or as a standing support.

 CAUTION

•  Suction cup may release.

•  Do not use on thin glass.

Notice:

 Surface must be very smooth 

and completely clean to get a strong 
seal. If suction cup does not hold 
well, wipe with a damp cloth or 
apply a thin layer of petroleum jelly 
around the rim of the rubber pad to 
enhance the vacuum.

Summary of Contents for E760

















Reviews: