Rifton E760 Product Manual Download Page 14

14

Maintenance 

This product is designed and tested for an expected life of 5 years when used 
and maintained in accordance with this manual. At all times, users must ensure 
that the product remains in a safe and useable condition, including regular 
maintenance and inspections as specifi ed in the manual. To prevent structural 
failures and SERIOUS INJURIES, do not use Rifton components and products 
for any purpose other than for their intended use. Inspect Rifton components 
and products regularly for loose or missing screws or rivets, metal fatigue, 
cracks, broken welds, missing attachments, loose staples and general instability. 
Immediately remove from use when any condition develops that might make 
operation unsafe. Replace or repair components or products that are damaged 
or appear to be unstable. Use only Rifton authorized replacement parts. Order 
information for replacement parts is provided on the back of this product manual.

Cleaning     

As needed, clean Toddler Chair and Dolly with disinfectant wipes or a solution of 
up to 10% bleach. Do not use excessive amounts of water.

The hip strap may be removed for cleaning. To remove strap, pull the tab and twist 
it to align it with the T-slot on the chair side. Pull on the strap as you push the tab 
through the slot. 

To replace the strap, push the tab all the way through the T-slot and pull the strap 
back so that the tab sits fl at. Be sure to replace the strap securely after cleaning.

Clean tray with a mild detergent or disinfectant. Do not use abrasive cleaners, do 
not leave in hot sun, and do not send through a dishwasher.

Warranty Statement     

If a Rifton product breaks or fails in service during the fi rst year, we will replace it 
free of charge.

Summary of Contents for E760

















Reviews: