RIEXINGER BSM 1000, Operating Manual

Page: 46 / 86

44 7. Operation
7) If the desired cutting depth was achieved and the saw-band motor or saw-bow motor is still
running, stop it by releasing the buttons of the
Safe Ball
8) Raise the saw bow by pressing and press and hold the button Lift up until the saw band has
been raised above the upper workpiece edge.
9) Remove the workpiece and offcut piece from the machine or position it anew if you wish to
perform another cut on the same workpiece (see Chap. 7.8 on p. 38)
10) Begin again with Step 2) to execute another cut.
Information
If you want to interrupt the sawing process, just release the buttons for the Safe
Ball
l
The motors stop and the saw bow remains in the current position.
BSM 631 / BSM 800 / BSM 1000