RIEXINGER BSM 1000, Operating Manual

Page: 33 / 86

6. Setup and activation 31
2) Establish the pneumatic connection by connecting the plug coupling of an air pressure hose
with the plug fitting behind the switchboard cabinet.
6.7 Connect to suctioning (optional)
Caution!
Loosely laid suction hose is a tripping hazard!
Lay the suction hose to the machine so that it does not pose a tripping hazard.
E.g. cable bridges or connections along the ceiling can be used.
Attention!
Not extracted shavings accumulate inside the machine and can impair the
function of the BSM 631 / BSM 800 / BSM 1000!!!
Therefore, connect the BSM 631 / BSM 800 / BSM 1000 into an appropriate
extraction system.
Attention!
An incorrectly routet suction hose can be damaged!
Therefore take into account when routing the suction hose, the vertical move-
ments of the saw frame.
1) Ensure that the parameters of suction system consist required values (see Chap. 3.8 on p. 18)
2) Connect the BSM 631 / BSM 800 / BSM 1000 to the suction system by connecting suction
hose with extraction nozzle.
6.8 Initial operation
Attention!
Warning against damage to machine's electrical equipment caused by con-
densation!
Wait several hours before turning on the main switch of the machine if there has
been a sudden change in ambient temperature.
1) Set the machine up (see Chap. 6.4 on p. 29).
2) Remove the tranport anchors at the saw bow.
3) Set the saw bow to 0 degrees
BSM 631 / BSM 800 / BSM 1000