16
Servicing the Connecting Rod Assembly
and Eccentric Assembly
Refer to the Preventive Maintenance and
Troubleshooting Guide in this manual to determine
whether a complete connecting rod assembly, or its
component parts, or an eccentric needs to be
serviced.
Component Parts Required
You will need:
Connecting rod assembly(ies) or piston cups and
sleeves
Valve plate gasket O-ring(s)
Head gasket O-ring(s) (if defective)
Removing the Connecting Rod Assembly
and Eccentric
NOTE: ONLY REMOVE ONE CONNECTING
ROD ASSEMBLY AT A TIME.
1. Carefully remove the fan by pulling it straight off
the motor shaft. Do not pull the fan blades.
