INSTALLER
29
MODELS
g
5/100 ÷ 8/100 NK
- Remove the boiler body casing panels and insulation
from the cardboard packing.
- Fit the insulation (1) around the boiler body, taking
care to position the slit (2) at the rear.
- Fit the insulation (3) to the rear of the boiler body, and
fix it in place with the adhesive aluminium foil tape (4)
supplied with the casing.
- Remove the top nut (5) from the storage cylinder flan-
ge and fit the casing support bracket (6).
- Replace the nut (5) on the flange but do not tighten
yet.
- Fix the side panels (7) to the bracket (6) and base (8)
using the screws provided.
- Fit the rear panels (9) and (10) and fix them in place
with the screws provided.
- Fit the front panel (11) to the bracket (12) using one of
the burnished screws provided.
7
9
10
3
4
8
7
1
2
6
5
6
11
12
FITTING THE CASING PANELS
