23
ENGLISH
MEASUREMENT VALUES
Serve to display the current measured temperatures.
b
If ‚error‘ appears on the display instead of the meas-
urement value, there may be a defective or incorrect
temperature sensor.
STATISTICS
Serve for function control and long-term monitoring of the
system.
b
For time-dependent functions such as circulation
and anti-legionella and the evaluation of system
data, it is essential that the time is accurately set
on the controller. Please note that the clock contin-
ues to run for about 24 hours if the mains voltage is
interrupted, and afterward must be reset. Improper
operation or an incorrect time may result in data be-
ing cleared, recorded incorrectly or overwritten. The
manufacturer accepts no liability for the recorded
data!
Operating hours
Display of operating hours of the relays connected to the controller.
Heat quantity
Display of the consumed heat quantity form the system in kWh.
This is an indicative value.
Graphic overview
This results in a clear illustration of the data as a bar graph. Different time ranges are available for comparison. You can
page through with the two left keys.
Notifications
Display of the last 20 errors in the system with indication of date and time.
Reset / Clear
Resetting and clearing the selected statistics. Selecting ‚all statistics‘ clears everything except the messages.
1.Exit Measurements
Info
1.1.Storage ret. 19°C
1.2.Circulation 39°C
esc
2.Exit Statistics
OK
2.1.Operating hours DHW
2.2.Operating hours circ.
esc
Summary of Contents for SC ACS 160
Page 9: ...9 ENGLISH WIRING DIAGRAM ...
Page 43: ...43 ENGLISH ...
