20081753
40
GB
Start-up, calibration and operation of the burner
6.8.1
Modify "acceleration- deceleration train"
parameter
The burner leaves the factory with the parameters
522 (acceler-
ation) and
523 (deceleration) already set.
If the operator needs to modify them, proceed as follows:
Access the Parameters Level referring to see “Access procedure
with password” on page 37.
Using the
"+" key select the parameters group 500:
Using the
"+" key select the parameters group 522 (accelera-
tion):
press the
"info" key to change parameter 522.
The set value must be at least 20%
greater than the ACCELER-
ATION TRAIN parameter of the inverter.
With the key
"+"
Select the parameter
523 (deceleration):
press the "
"info"" key to change parameter 523.
The set value must be at least 20%
greater than the DECELER-
ATION TRAIN parameter of the inverter.
6.8.2
Modify the parameter for continuous/
intermittent operation (FS2/FS1)
The burner leaves the factory with parameter
239 set at "1". This
means that the burner is ready for intermittent operation (
FS1).
In the event that continuous operation (
FS2) is required, proceed
as follows:
access the Parameter Level referring to “Access procedure with
password” on page 37, with the
"+" key select the parameters
group
200:
With the
"+" key select the parameter 239 and then follow the
procedure for changing a parameter on page 38 to set the value
0 (FS2).
For details on the type of operation, see “Electrical wiring” on
page 29.
WARNING
Example:
522 at 12s ----> inverter parameter at 10s
522 at 10s ----> inverter parameter at 8s
WARNING
Example:
523 at 12s ----> inverter parameter at 10s
523 at 10s ----> inverter parameter at 8s
/reset
h min s
%
P
D
9
5
9
4
/reset
h min s
%
P
D
9
5
9
5
WARNING
For the burners in the RS 310-410-510- 610/ EV
series, continuous operation (FS2) is allowed only
with an ionisation type of flame detector. There-
fore the UV sensor kit is not permitted.
/reset
2
0
0
8
2
2
1
5
Summary of Contents for RS 310/EV BLU FS1
Page 2: ...Translation of the original instructions...
Page 79: ......