20095002
26
GB
Installation
5.9
Burner closing
Once the combustion head adjustment is completed:
reassemble the burner on the guides 3) at about 100 mm
from the pipe coupling 4) - burner in the position shown in
Fig. 19;
insert the electrode cable, then slide the burner as far as the
pipe coupling - burner in the position shown in Fig. 22;
connect the plug of the servomotor 14)(Fig. 19) and tighten
the grommet 15);
connect the socket of the maximum gas pressure switch;
refit the screws 2) on the guides 3);
fix the burner to the pipe coupling with the screws 1).
WARNING
When fitting the burner on the two guides, it is
advisable to gently draw out the high voltage
cable until it is slightly taut.
Fig. 22
2
3
4
5
1
D8968
