2788
3
GB
3.
INSTALLATION
THE BURNER MUST BE INSTALLED IN CONFORMITY WITH LEGISLATION AND LOCAL STANDARDS.
3.1
BOILER FIXING
➤
Put on the flange (1) the screw and two nuts, (see fig. 3).
➤
Widen, if necessary, the insulating gasket holes (4), (see fig. 4).
➤
Fix the flange (1) to the boiler door (3) using screws (5) and
(if necessary)
the nuts (2)
interposing the
insulating gasket (4)
, (see fig. 2).
➤
After installation ensure that burner is lightly inclined as in fig. 5.
3.2
FUEL SUPPLY
The burner is designed to allow entry of the oil supply pipes on either side.
Depending on the oil supply pipes position (to the right or to the left hand side of the burner) the fixing plate
(1)
and closing plate
(2)
should be reversed, (see fig. 6).
Fig. 5
D5012
Fig. 4
D5025
Fig. 2
Fig. 3
S7071
D4017
Fig. 6
1
2
1
Summary of Contents for Gulliver RG5S
Page 53: ......
Page 54: ......
Page 55: ......
Page 56: ...RIELLO S p A I 37048 San Pietro di Legnago VR Tel 39 0442 630111 http www riello it...
