20050873
6
GB
3.2
BOILER FIXING
To fit the burner to the boiler it is necessary to carry out the following:
Widen, if necessary, the insulating gasket holes (3, fig. 3).
Fix the flange (5) to the boiler door (1) using four screws (4) and (if necessary) the nuts (2)
interposing
the insulating gasket (3)
but keep unloosing one of the two upper screws (4) (see fig. 2).
Put on the flange (5) the burner combustion head, tighten the flange with the screws (6) and lock the
loose screw (4).
N.B
.: The burner can be fixed with the variable dimension
(A)
(see fig. 4). Anyway, make sure that the
combustion head crosses completely the boiler door thickness.
3.3
PROBE-ELECTRODE POSITIONING
Fig. 2
Fig. 3
TYPE
A
917T2
267 - 282
D5012
S7002
Fig. 4
A
D5011
ATTENTION
Ensure that the plate (3, fig. 5) is always
inserted in the flattening of the electrode.
Lean the probe insulator (4) against the cup (2).
D6088
±
0.3
3.5
±
0.3
31
Fig. 5
1
3
2
4
Summary of Contents for Gulliver BS3/M TXL
