Riello 7000.1000/S Installation Instructions Manual Download Page 8

8

Riello 7000

Riello 7000.1000/S e 1500/S solar storage tanks are deli-

vered in a single package, protected by a plastic bag and 

supported by a wooden pallet.

Riello 7000.2000/F - 3000/F - 5000/F solar storage tanks 

are delivered in two separate packages:

- The first contains the painted tank, protected by a pla-

stic bag and supported on a wooden pallet. The tank is 

complete with four probe wells fitted in special sleeves. 

(All other sleeves are covered with protective caps.) The 

counter-flange comes ready bolted to the tank’s flange 

and fitted with a seal.

- The second package contains another plastic bag with 

the  elegantly  finished  polyurethane  insulation,  fitting 

sleeves for the insulation, thermoformed cover, flange 

cover, identification plates and documentation.

The following items are delivered in a plastic bag inside the packaging:

- instruction manual

- data plate and label with bar code

- spare parts catalogue

- hydraulic test certificate

    The instruction manual is an integral part of the solar storage tank. Once located, read it thoroughly and keep it 

safe.

Riello 7000.1000/S - 1500/S

Riello 7000.2000/F - 3000/F - 5000/F

9   Unpacking the product

Summary of Contents for 7000.1000/S













Reviews: