4
Riello 7000
Riello 7000 solar storage tanks are identified by three plates. (On models Riello 7000.2000/F - 3000/F - 5000/F these
must be applied by the installer after the insulation has been fitted, see page 20).
If these plates or any other means of clearly identifying the product
are defaced, removed or lost, proper installation and servicing may be
rendered difficult.
- Data plate
This lists the technical specifications and performan-
ce of the product.
- Product identification plate
This bears the name of the product.
- Serial number plate
This specifies the serial number, model, consumption
and capacity.
Model
Code
Serial
number
Year of manufacture
SOLAR STORAGE CYLINDER
Storage cylinder capacity
Maximum absorbed power [Primary T = 80
°
C]
Specific flow rate [
Δ
T 35
°
C]
Maximum working pressure of coil
Maximum working temperature of coil
Maximum working pressure of cylinder
Maximum working temperature of cylinder
Heat loss
Electrical consumption
Power supply
l
kW
l/1'
bar
°
C
bar
°
C
kW/24h
W
V-Hz
Obligatory ground connection
Serial
number
Model
Storage cylinder
capacity
l
kW
Maximum
absorbed power
Model
Code
Serial
number
Year of manufacture
SOLAR STORAGE CYLINDER
Storage cylinder capacity
Maximum absorbed power [Primary T = 80
°
C]
Specific flow rate [
Δ
T 35
°
C]
Maximum working pressure of coil
Maximum working temperature of coil
Maximum working pressure of cylinder
Maximum working temperature of cylinder
Heat loss
Electrical consumption
Power supply
l
kW
l/1'
bar
°
C
bar
°
C
kW/24h
W
V-Hz
Obligatory ground connection
Serial
number
Model
Storage cylinder
capacity
l
kW
Maximum
absorbed power
ACCUMULO INERZIALE
Riello 7000 solar storage tanks are specifically designed
for integration in central heating systems (not for DHW
use).
The most important technical features of these storage
tanks are:
- The tank and coils (Riello 7000.1000/S and 1500/S models
only) are specially designed and shaped for optimum
performance in terms of stratification, heat exchange
and replenishment times.
- Water fittings are available at different heights, permit-
ting different hot water generators to be used without
reducing the stratification effect.
- CFC-free polyurethane insulation and an elegant exter-
nal coating reduce heat loss and improve efficiency.
- A flange is provided for easy cleaning and to allow an
extra heat exchanger to be added (Riello 7000.2000/F -
3000/F - 5000/F models only).
Riello 7000 storage tanks can be connected to a special
solar controller and can be integrated in solar heating sy-
stems in which Riello boilers or water heaters serve as au-
xiliary heat generators. A heat exchanger for installation
on the flange is available separately for the Riello 7000
.2000/F - 3000/F - 5000/F model.
3 Product description
4 Identification
Riello S.p.A.
Via degli Alpini 1
37045 Legnago (VR) - Italy
Riello S.p.A.
Via degli Alpini 1
37045 Legnago (VR) - Italy