79
PRO-
EN
Parameter modification
To modify a parameter use the Up and DOWN keys then
press ENTER.
The following page will appear:
Select the value with the UP and DOWN keys.
Numbers from 1 to 9 will appear and, only for the first
digit, also the symbol -. Once number is selected
confirm with ENTER.
Modify value
csp 2
14.0
°C
13.5_
°C
Cooling Setpoint 2
Press RETURN to cancel the new entered
value.
Cursor position
Current value
New value to be entered
If the user quits the main page, a confirmation message
will indicate that the value has been saved.
Press ENTER to confirm the entered value, otherwise
RETURN to cancel the value saved.
Characteristics of the operating mode selection page
With unit OFF, by pressing the on/off key the display will
be
activated
accessing
the
operating
mode
selection page.
Select Machine Mode
Local On
Local Schedule
CCN
Remote
With UP and DOWN keys it is possible to select one of
the four operating modes available. ENTER key confirms the
selection.
Command accepted
The machine starts the stop phase if the ON/OFF key is
pressed while the machine is running. However, before
stopping a page will appear asking the user to press again
the turning off key to confirm turning off operation. This
procedure prevents anomalous stops if the key is pressed
by accident.
Current value
New value before confirmation
Selected parameter
description
List of available
operating modes
Parameter entering page
This page can show parameters providing informa-
tion on the machine such as temperature and pressure or
configuration parameters such as water setpoint tempera-
ture.
\\MAINMENU\TEMP
EWT
12.0°C
LWT
7.0°C
OAT
35.0°C
CHWSTEMP
-17.8°C
SCT_A
57.0°C
Leaving Water Temperature
Use the UP and DOWN key to scroll through
the page and ENTER to modify the parameter selected (if pos-
sible).
If a value cannot be modified an error page will appear.
\\MAINMENU\SETPOINT
cps1
12.0°C
cps2
14.0°C
hps1
40.0°C
hps2
40.0°C
hramp_sp
27.4°C
Cooling Setpoint 2
Modify value
csp 2
14.0
°C
_
°C
Cooling Setpoint 2
\\MAINMENUSETPOINT
Save changes?
PRESS ENTER
TO CONFIRM STOP
Use the UP ad Down keys to select the menu and press
ENTER to confirm selection gaining access to the spe-
cific parameters. By selecting LOGOUT you will quit
the menu page; password must be re-entered to gain access
to the menu page again. If you press the RETURN key inste-
ad, it is possible to return to the previous selection without
quitting the menu page.
Unit current mode
