3330
2
GB
1.
BURNER DESCRIPTION
One stage light oil burner with low pollutant emissions (Nitric Oxide NOx, Carbon monoxide CO and unburnt
Hydrocarbons).
1.1 BURNER EQUIPMENT
Flange with insulating gasket. . . . . No. 1
Screw and nuts for flange to be fixed to boiler . . . No. 4
Screw and nuts for flange . . . . . . . No. 1
Flexible oil pipes with nipples. . . . . . . . . . . . . . . . No. 2
7 pin plug . . . . . . . . . . . . . . . . . . . No. 1
Remote reset connection . . . . . . . . . . . . . . . . . . . No. 1
Recirculating pipe . . . . . . . . . . . . . No. 1
1.2 ACCESSORIES
SOFTWARE DIAGNOSTIC KIT
A special kit is available that, by an optical link to a PC, shows the burner life together with operating hours, type
and number of failures, serial number, etc.
To visualise the diagnostics proceed as follows:
³
Connect the kit supplied separately to the control box socket.
Reading of the information begins when the software programme included in the kit starts.
REMOTE RESET KIT
The burner has a remote reset kit (
RS
) consisting of a connection and a push-button operating at a dis-
tance of 20 metres max.
In order to install it remove the protective lock-out installed at the factory and insert the lock-out supplied
with the burner (see electrical diagram on page 6).
1
– Oil pump
2
– Air damper adjustment assembly
3
– Nozzle holder assembly
4
– Flange with insulating gasket
5
– Control box
6
– Reset button with lock-out lamp
7
– Amplified photoresistance
8
– Combustion head
9
– Recirculation pipe
10
– Motor
11
– Capacitor
³
Burner with CE marking in conformity with EC directives: EMC 89/336/EC - 2004/108/EC, Low Voltage
73/23/EC - 2006/95/EC, Machines 98/37/EC and Efficiency 92/42/EC.
³
CE Certification No.:
0036 0232/98
(370T1) –
0036 0233/98
(374T1), as 92/42/CEE.
³
The burner meets protection level of IP X0D (IP 40) as EN 60529.
³
The burner is approved for intermittent operation as per Directive EN 267.
D7350
Fig. 1
2
7
6
1
3
10
5
9
4
8
11
