…for everyday adventure
39
Traction Batteries
Connection and Extraction
To remove the batteries, follow the following sequence:
Disconnect the battery from the bike by pulling on the red handle of the connector. The bike must be turned off
when the battery is switched off.
Release the Velcro on the strap and release the strap rings on both sides of the belt from the hooks that attach it
to the door.
Pull the strap and attach the Velcro to form a handle to pull to remove the battery. You can remove the strap
from the rail by applying the Velcro connection to the strap.
Pull the handle to remove the battery.
To install the batteries again, follow the sequence before the reverse: Insert the battery into the cage, place the
ring ends of the tape on the hooks of the cage and fix it by pressing the Velcro on the tape, connect the connector
always with the bike off , push the door in to position it and fix it by turning the locks so that the inside face of the
same points to the center of the motorcycle. Finally, lock the locks with the key.
Summary of Contents for NUUK CARGO
Page 1: ...NUUK URBAN CARGO TRACKER ...
