…for everyday adventure
28
Operation of the vehicle
It is very important to know your vehicle thoroughly, as well as its operation
.
Ignition sequence
To start the vehicle, insert the key into the ignition lock and turn clockwise to the on position. The Display will turn on indicating
the vehicle's activation sequence as well as the front and rear lights of the vehicle. To activate the vehicle, press a brake lever and
the up or down button on the mode switch simultaneously. If the sequence is successful, a beep will sound and the display shows
the driving information.
Set the driving mode and lift the side stand to accelerate. Make sure the emergency stop switch is off, or the accelerator will not
operate.
Before performing the vehicle activation sequence, it will not respond to the throttle drive, but other functions such as lights,
indicators and horn are available.
Attention
Remember that the vehicle's starter battery feeds the lights after activating the system. Once activated, the traction
batteries go on to perform this function. To avoid over discharge of the starter battery, avoid leaving the vehicle on without
activating it for a long time.
.
Summary of Contents for NUUK CARGO
Page 1: ...NUUK URBAN CARGO TRACKER ...
