RIEJU MRX-SMX 50, Chassis Workshop Manual

Page: 33 / 52

ENGLISH
Rieju chassis
Chassis
32
10. TAILLIGHT
Cut the clamp that hold the leads and disconnect them from the main wiring.
After, loosen the 2 screws (A/F -19) that attach the light to the fender.
To extract it, pull the lead to remove the light.
ATTENTION: Before proceeding to the lights disassembly, pay attention to the sequence
of the terminals for the later assembly (see electric diagram).
11. REAR MUDGUARD
*Remove the seat, the pillion seat, the rear turn signals and the taillight.
Unscrew the 2 bolts (A/F-20) holding the 2 nuts (B/F-21) of the lower part.
A
A
B
F-18 F-19
F-20
F-21