RIEJU MRX-SMX 50, Chassis Workshop Manual, Page: 19 / 52

ENGLISH
Rieju chassis
Chassis
18
UNPACKING
• Unpack the motorcycle following the indications appearing on the same packaging, after
that it should be thrown according to current regulations.
“AESTHETIC” CONTROL
• Control visually that all the components of plastic material are correctly assembled and
that the motorcycle does not show any scratch, mark, etc.
IDENTIFICATION DATA
Engine identification number
• The data for identifying the engine (A/F -1) are on the right sump.
Vehicle identification number
• The identification number of the motorcycle (B/F -2) is stamped on the steering pipe. This
identification number is used to identify the moped.
F-1
F-2
B
A
F-3
C
C
SAFETY TAG
It contains the identification data of the motor-
cycle according to the 97/24/CE guidelines.
It is absolutely essential to indicate the identi-
fication data of the motorcycle when ordering
spare parts.
This tag should not be substituted either mo-
dified.
It is located in the left side of the chassis close
to the steering pipe.