RIEJU MRX-SMX 50, Chassis Workshop Manual

Page: 24 / 52

Rieju chassis
23
Chassis
EN
G
LI
S
H
COOLANT
Control
1. Remove the cap (A/F-12) with the engine cold and first release the residual pressure.
2. Check the coolant level with the engine cold, since it varies depending on the engine
temperature. The coolant level should fill the radiator panel.
3. If the level is low, add coolant.
4. Put the cap again.
COOLANT REPLACEMENT
Before carrying out this operation, place a tray under the tube.
1.
Parking the vehicle on a flat surface and place a tray under the radiator.
2.
Drain the cooling circuit removing the drain plug (A/F-13).
In case you need more coolant than usual to reach the indicated level, or if you need to refill
too often, control the cooling circuit.
A
F-12
A
F-13