RIEJU MRT 125 LC, Owner'S Manual

Page: 48 / 72

MRT 125 LC 48
Brakes
The brake fl uid tanks, one for each brake, have a viewer so you can check their level.
CAUTION:
If the brake fl uid level is nearing half in the viewer, both the front and the back brake, check
brake pad thickness and check that they have not reached their limit for use. If the thickness is correct,
fi ll the brake fl uid and check that there are no leaks. If you are unsure, immediately go to your offi cial
Rieju
dealer. They know what to do in all cases. This may affect your safety.
If the pedal or brake lever is spongy when activated, there may be air in the pump or circuit for each
brake, or a component of the braking system may be in poor condition.
Do not mix different kinds of brake fl uid.
The fl uid used to fi ll or renew your circuit must meet the standard specifi ed on each circuit’s fl uid tank.
As such, DOT4 must be used with the rear brake.
The specifi cation must never be changed; always follow the DOT4 specifi cation. It is not important if the
brake fl uid is a different brand, but it is
NECESSARY
that it be the same specifi cation.
Do not use fl uid from a container that is unsealed (opened).
NEVER
, under any circumstances, use
brake fl uid from an unsealed container nor, obviously, brake fl uid that has already been used.