Settings
Secondary transmission ratio
Secondary transmission ratio can be modified
by changing the front and/or rear sprockets.
The available sizes of sprockets in RIEJU are
as follows.
Rear sprockets: 39, 40, 42, 44, 46, 47, 48, 49,
50, 51, 52.
Front sprockets: 12, 13.
If the ratio is shortened, your RIEJU will lose
top speed but gain in acceleration and at low
speeds will be more manageable on difficult
terrain.
NOTE
: Pay attention to engine rpm.
If the ratio is extended, your RIEJU will gain top
speed but will lose acceleration
and
manageability at low speeds.
Suspension setting
KYB
AVAILABLE SETTINGS
Your motorcycle has adjustable suspensions,
these adjustable settings are:
Front fork (KYB)
•
Rebound (3) - located at the bottom of the
fork.
•
Compression (2) - located at the top of the
fork.
•
Air purge (1) - located at the top of the fork.
•
Oil volume - 350 ml. (KY B 010M Oil)
The volume of the oil in the fork, affects the
level of the same inside and may be adjusted.
A change in the volume, and therefore of the oil
level will not affect the first part of the
suspension travel, but it will affect the final part.
When the volume/oil level is increased, the
suspension is more progressive and the action
of the front fork is harder at the end of the
travel.
When the volume/oil level is lowered, the
suspension is less progressive and the action
of the fork is less hard at the end of the travel.
1
2
3
61
Summary of Contents for MR 200
