Riedel CCP1116, Quick Manual

Page: 12 / 22

CCP-1116 Commentary Control Panel – Quick Guide 1.2
Page 12
5.2 GPIO functions
Open the „ Properties “ of the CCP-1116 to define the GPIOs.
GPIO IN 1 and 2 can be used within the Artist system to signalize activated „ ON AIR “ buttons on
the CCP-1116 somewhere and somehow in the system.
GPIO Out 1 and 2 are used internally in the CCP-1116 to activate the “ MIC Mute ” buttons, for
example when the Commentator is talking to an Intercom destination while he is on air.
Both GPIOs will be labeled automatically with the panel name and functionality.
GPIO IN 3 and GPIO OUT 3 are the only ones, which can be used individually.
The GPIO 3 is available on a XLR5 pin connector on the rear side of the CCP-1116.
Now you can drag and drop GPO 1 and 2 to all the intercom buttons, that are able to activate the
microphone of the panel (Call to Port, Call to Group, Call to Conference), to automatically activate
the On Air “
MIC MUTE ” button of the corresponding Commentator-side.
For only listen functions ( Listen to ) an assigned GPO is not necessary.