5
Rieco-Titan
Power Conversion
Assembly
Figure 2
Universal Kit
Rieco-Titan Jacks- The drive pin in the jackpost
must be knocked out. The old bushing and washer
must be replaced with a new steel bushing. Install
new 5/32” drive pin so that it is equally protruding
on each side to fit inside the drive tube collar.
Clean gearbox with cloth or paper towel. No
solvents.
Atwood Jacks- The ball bearing on the jackpost,
new steel bushing and washer are not used on this
jack. The drive tube assembly is positioned over the
loose drive pin to keep it in place. Clean gearbox
with a cloth or paper towel. No solvents.
Revised 8-24-08
pantherRVproducts
