2
CAUTION !!! If your jacks are ball screw
type, with tube welded to side of gear box,
make sure your camper is on your truck or
supported on blocks, so that the camper
cannot tip over while you are working on
this conversion!
Note -The installation instructions for this
conversion kit follow. Basic instructions
are shown for the Acme screw drive jacks.
Alternate instructions are included for
installation of the conversion kit on Atwood
ball screw drive jacks.
REMINDER:
Make sure your camper is supported by
your truck bed or on blocks to prevent it
from tipping over while you do this electric
conversion.
Revised 8-24-08
pantherRVproducts
