background image

Purpose 

 

 

Rieber GmbH & Co. KG

 

3.3 

Accessories and their use 

 

See website   http://www.rieber.de 

4 Purpose 

This chapter describes the intended use and contains warnings against misuse, for your safety. 

4.1 

Intended use of dispensers, general 

Generally, the following are intended uses for the product: 

 

For mobile meal services in catering, hotels and restaurants; also for managed care 

facilities and schools.   

 

For keeping stacked parts neutral, cold or warm.  

 

For stacking and dispensing stacked parts.  

WARNING!

  Only remove parts at serving height. Jammed parts may generate high 

forces which may discharge suddenly. Stacked parts must be centred and guided.  

 

WARNING!

  To avoid injuries such as shearing and crushing due to reaching into 

the inside of the unit or touching hot surfaces, use of the appliance in public/for self-
service should only be allowed under constant supervision. 

 

WARNING!

  Wear personal protective equipment such as protective gloves, which 

will prevent you from burning your arms or hands on hot parts, such as plates, meal 
trays, etc.  

 

For use by instructed persons only. 

 

Prevent any potential misuse in advance: 

 

WARNING!

  Never operate the appliance unsupervised. 

 

ATTENTION!

 Baskets made of plastic are not suitable for heated crockery 

dispensers. 

 

Not intended for private use at home. 

 

Do not lean against or sit on the appliance.  

 

Keep any combustible or explosive fluids away from heated appliances, to prevent 

the risk of fire or explosion. 

 

Heated units may only be used for heating crockery. Do not use to heat up a room.  

 

Do not use this appliance with poor floor conditions. 

 

We are not able to rule out the possibility of marks appearing on the floor due to 
friction with casters or the formation of scratches due to split cracks in the 
casters, for example.   

 

We are not able to rule out the possibility that the casters may be damaged or 
become unusable due to swelling or sharp edges on the floor. 

 

This appliance may only be moved manually, machine-supported moving is not 

permitted.  

 

Summary of Contents for ERR

































Reviews: