Adjustment of the dispenser to the crockery used
Rieber GmbH & Co. KG
23
Adjustment of the platform to the weight of the crockery
WARNING!
Risk of injury if platform is adjusted incorrectly. When plates are removed from a jammed
platform, crockery parts might shoot out.
►
Distribute springs evenly. Only remove springs at the bottom.
►
Carry out the setup work correctly.
See illustrations at beginning of chapter
Open the housing or guard. To do this, loosen the hexagon socket screw (1).
▌
The springs are easily accessible.
Place 2 or 3 baskets of crockery on the platform.
▌
The spring adjustment is perfect, if the top basket is flush with the edge, or a
little below.
If platform projects, remove the springs again.
If platform does not project enough, install springs.
Close the housing or guard again. To do this, tighten the hexagon socket screw (1).
WARNING!
Risk of injury if dispensing level is below lower edge of housing. Fingers and hands may be
sheared or crushed.
►
Ensure that the dispensing level is always above the lower edge of the housing.
7.4
Ultra dispenser REU …
Procedure
See chapter ‘Pipe dispenser R …’, page 18
7.4.1
Built-in dispenser E …
Procedure
chapter ‘Pipe dispenser R …’, page 18
When reinstalling the adjustable pipe, insert the 3 locking clips (1) into the corresponding cutouts
(2) on the upper termination ring of the jacket.
