transfer to properly equipped smartphones or tablets
(“devices”) running iOS or Android operating systems.
1. Download the appropriate RIDGID
®
Link app to your
device by going to RIDGID.com/apps, the Google
Play Store or the Apple App Store.
2. When the tool is ON, a Bluetooth wireless technology
equipped device can find and pair with the press tool.
In the Bluetooth settings of your device, select desired
RIDGID tool. Refer to your device instructions for
specific information on how to connect via Bluetooth
wireless technology. Once connected, the green-
blue-blue-blue tool status lights will be lit.
After the initial pairing, most devices will automati-
cally connect to the Tools when the Bluetooth wireless
technology is active and in range and if device settings
are configured to do so. Press tools should be less
than 33 ft. (10 m) from the device to be detected.
Any obstacle between the tool and device can reduce
the operational range.
3. Follow the app instructions for proper use. The mode
of operation can be changed via app. The app also
allows monitoring of tool cycles.
4. The wireless data transfer turns OFF when the press
tool is switched OFF. Turn Bluetooth wireless device
OFF to reduce device battery drain.
Cold Weather Operation
As temperature drops, hydraulic fluid thickens and battery
performance degrades. To reduce the risk of improper
operation, the RP 350 and RP 351 will not operate outside
of the specification temperature range as indicated by
the tool status lights
(Figure 5).
When ambient conditions are outside the specification
temperature range, keep the tool and batteries in a con-
ditioned space until ready to use.
Storage
Remove battery or AC Adapter from the press tool. Store
press tool and battery in case. Avoid storing in extreme
heat or cold. The tool will not turn ON if the tool is outside
the specification range. This will be indicated by the tool
status lights.
(See Figure 5)
Store tool in a dry, secured, locked area
that is out of reach of children and people unfamiliar with
the press tool. The tool is dangerous in the hands of
untrained users.
Maintenance Instructions
WARNING
Make sure tool is switched OFF and battery or AC
Adapter is removed from tool before performing
maintenance or making any adjustment.
Cleaning And Lubrication
1. Wipe the tool clean daily with a clean dry cloth.
2. Inspect the attachment mounting pin and lubricate the
pin with silicone lubricant as needed.
3. Check return springs in attachments with each use.
Attachments should open and close freely with only
moderate finger effort required.
Service And Repair
WARNING
Improper service or repair can make tool unsafe to
operate.
Service and repair on the RP 350 and RP 351 Press Tools
must be performed by a RIDGID Independent Press Tool
Service Center.
For information on your nearest RIDGID Authorized Inde-
pendent Service Center or any service or repair questions
see
Contact Information
section in this manual.
999-995-220.08_REV. B
11
RP 350/RP 351 Press Tools
WARNING
