background image

8

R

F

R

Fig. 1

SWITCH TRIGGER /

FORWARD-REVERSE

LEVER

SPADE

HANDLE

LOCK-ON

BUTTON

CHUCK

AUXILIARY

HANDLE

LIGHTED

PLUG

FEATURES

UNPACKING

INSTRUCTIONS

When unpacking the drill:

Carefully remove the tool and accessories from the box.

Make sure that all items listed in the packing list are in-
cluded.

Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.

Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.

If any parts are damaged or missing, please call
1-866-539-1710 for assistance.

PACKING LIST

1/2 in. (13 mm) Single Speed Reversible Drill

Spade Handle

Auxiliary Handle

Chuck Key

Key strap

Operator’s Manual

WARNING:

If any parts are missing do not operate the tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.

WARNING:

The tool should never be connected to a power
supply when you are assembling parts, making ad-
justments, cleaning, performing maintenance, or
when the tool is not in use. Disconnecting the tool
will prevent accidental starting that could cause injury.

Summary of Contents for R7120



















Reviews: