background image

17

This product is manufactured under license from Ridgid, Inc.
by One World Technologies, Inc. All warranty communications
should be directed to One World Technologies, Inc. at (toll-
free) 1-866-539-1710.

90-DAY SATISFACTION GUARANTEE POLICY

During the first 90 days after the date of purchase, if you are
dissatisfied with the performance of this RIDGID tool for any
reason you may return the tool to the dealer from which it
was purchased for a full refund or exchange. To receive a
replacement tool you must present proof of purchase and
return all original equipment packaged with the original
product. The replacement tool will be covered by the limited
warranty for the balance of the three year warranty period.

WHAT IS COVERED UNDER THE LIMITED
THREE YEAR WARRANTY

This warranty covers all defects in workmanship or materials
in this RIDGID tool for the three year period from the date of
purchase. This warranty is specific to this tool.  Warranties
for other RIDGID products may vary.

HOW TO OBTAIN SERVICE

To obtain service for this RIDGID tool, you must return it,
freight prepaid, to an authorized RIDGID service center for
hand held and stationary power tools. You may obtain the
location of the authorized service center nearest you by
calling  (toll-free) 1-866-539-1710 or by logging on to the
RIDGID website at www.ridgidwoodworking.com. When
requesting warranty service, you must present the proof of
purchase documentation, which includes a date of purchase.
The authorized service center will repair any faulty
workmanship, and either repair or replace any defective part,
at our option at no charge to you.

WARRANTY

WHAT IS NOT COVERED

This warranty applies only to the original purchaser at retail
and may not be transferred. This warranty only covers
defects arising under normal usage and does not cover any
malfunction, failure or defect resulting from misuse, abuse,
neglect, alteration, modification or repair by other than an
authorized RIDGID service center for hand held and
stationary power tools. One World Technologies, Inc. makes
no warranties, representations or promises as to the quality
or performance of its power tools other than those specifically
stated in this warranty.

ADDITIONAL LIMITATIONS

To  the extent permitted by applicable law, all implied
warranties, including warranties of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE, are disclaimed.
Any implied warranties, including warranties of
merchantability or fitness for a particular purpose,  that
cannot be disclaimed under state law are limited to three
years from the date of purchase. One World Technologies,
Inc. is not responsible for direct, indirect, incidental or
consequential damages. Some states do not allow limitations
on how long an implied warranty lasts and/or do not allow
the exclusion or limitation of incidental or consequential
damages, so the above limitations may not apply to you.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.

RIDGID

®

 HAND HELD AND STATIONARY POWER TOOL

LIMITED THREE YEAR WARRANTY
AND 90-DAY SATISFACTION GUARANTEE POLICY

One World Technologies, Inc.

Hwy. 8

Pickens, SC 29671

Summary of Contents for R7120



















Reviews: