5
INTRODUCTION
ASSEMBLY
UNPACKING
Check all parts from carton against the Carton Contents
List.
If any parts are damaged or missing, contact
1-800-4-RIDGID (US and Canada) or by email at
CARTON CONTENTS LIST (Fig. 1)
Key Description Qty
A* Powerhead Assembly ........................................1
B* Dust Drum Assembly ........................................1
C* Qwik Lock™ Filter .............................................1
D
Crevice Tool .....................................................1
E Dusting Brush . .................................................1
F Expandable Hose .............................................1
G Owner’s Manual. ...............................................1
* These parts come preassembled.
E
F
G
B*
A*
C*
D
SWEEP
Fig. 1
ATTACHING AND REMOVING VACUUM HOSE
(Fig. 2)
1. To Insert Hose into Vac Inlet Port: Insert the
Expandable Hose (F) with the Locking Tab End
into the Vac Inlet Port, located on the side of the
Dust Drum (B), above the RIDGID SWEEP Label.
Push the Hose End straight into the Vac Inlet Port
until the Hose Locking Tab fully engages the Inlet
Port Ridges.
2. To Remove the Hose from the Vac Inlet Port:
Turn Vac OFF. Rotate the End of the Expandable
Hose (F) in either direction to release the Hose
Locking Tab from the Vac Inlet Port. Press the Hose
Locking Tab and pull the Hose End straight out of
the Vac Inlet Port.
SWEEP
Vac Inlet
Port
Hose
Locking
Tab
(B)
SWEEP Label
(F)
Inlet Port
Ridges
Fig. 2
SP7125 HD03000 2022.indb 5
SP7125 HD03000 2022.indb 5
6/2/22 10:21 AM
6/2/22 10:21 AM
