Ricon S9922, User Manual

Page: 105 / 130

S9922 3G/4G Router User Manual
RICON: Mobile Connect Tecnology
Step 2
Press the RESET/DEF interface. Do not release it. Hold it, meanwhile power on router, till
30 seconds,and connection to PC is built properly. Then release RESET/DEF interface
.
Step 3
Input 192.168.1.1 in your browser, click “enter” you will see following page. If not, start
over again from step 1..
Step 4
Click “Browse” to select upgrading file, and then click “Upload” to begin upgrading.
Upgrading will need 4-6 miunites, if RUN light is on, upgrading is OK.
You can also PING br0 address on your PC ( eg. ping 192.168.8.1 –t ). if Ping ok, upgrading is OK.
---END
Backup setting
S9922 4G Router supports to backup and recover configuration file.

Click “Browse” to select a configuration file to be imported. And then click “Import” to
resume the configuration as the configuration file.

Click “Export” to export configuration file and save it in local PC.
After inport, router will reboot automatically.
“Key”: if key is input when export configuration file, this key need to be input in import. Not more than
8 digits for key.
Factory setting
S9922 4G Router has function to resume factory configuration. Users can set the configuration to factory
mode, and also can set the current configuration into default configutation and generate a default factory
configuration file in router. To resume this default factory setting, users can click “Load” in “factory
setting”. If the default factory configuration file is deleted, the router will be rusmed back to initial factory
setting.

Save: to save the current setting as default factory configuration setting.

Load: to resume default factory setting.
Patch operation function
S9922 4G Router support to view and delete patch.

View: to view current patches.