PTCS-7S Computerized Embroidery Machine Operation Manual V2.1
21
Part 6 On Board Lettering
In the machine operation interface, press
key to enter into letter interface, as
in the following Fig 8:
Press any letter key to select required letters or other signs. Press
key to switch
upper-case and lower-case letters. Press
key to clear letter. After entering is completed,
press
key to see the lettering setting interface (operation cannot be continued if
embroidery is operation mode), as in the following Fig 9.
Figure 8 On Board Lettering
Figure 9 Lettering Parameters Settings
