PTCS-7S Computerized Embroidery Machine Operation Manual V2.1
13
4.3-4 Offset Operation
In the embroidery process, if is required to return to the offset point. Press
key
once and the hoop is moved to the offset point and will stop. Press the key gain, the hoop is
moved from the offset point to the starting point and stops, and then it can continue embroidering.
4.3-5 Return to Stop Point
In the embroidery process, after the hoop is moved manually, if it is required to return to the
stop position of embroidery machine. Press
key to move the hoop to the stopping
point. After the key is pressed, it is moved to the stopping position automatically and stopped.
4.3-6 Set Color Changing Setting
The color changing setting includes color changing sequences and needle bar replacement.
In operation interface, press
key to enter into color changing interface. Fig. 7
Figure 7 Color Changing Setting
