EM-1010 computerized Embroidery Machine Operation Manual V2.0
45
several slow movement when drawing
needle bar
Filter 0 Stitch
Data:
Filter 0 stitch trace or not n embroidering
Yes
Yes, No
Reset Frame:
Search absolute origin of tabouret for every
time of powering on
No
Yes, No
Main
Axis
Brake Delay:
The larger the value is, the earlier the stop
position angle is
8*
1-20
Embroidery Parameters 6
Lifting Arm:
Tinsel landing chassis using method
Motor
Motors, Voltage
Left
Sequin
Size:
Left tinsel output size
3*
3-9
Right
Sequin
Size:
Right tinsel output size
3*
3-9
Stop Frame of
Moving:
Allow drawing bar stop or not when beyond
the tabouret
Yes
Yes, No
Return
offset
automatically
Deliver to highest position of tabouret
automatically or not after embroidery is
completed.
No
Yes, No
sn*
Embroidery machine using needle bar number (no default value)
-*
Set according to requirements (no default value)
22. 2 System Errors and Countermeasures List
Errors
Fault Causes
Countermeasures
Spindle is not at
100 degree
Spindle is not stopped at 100 degree
Jogging or manually rotated spindle to 100
degree
Spindle is not
rotated
1.Spindle controller has no signal or
power input
2. Spindle motor has no signal or power
input
3.Controller or spindle motor damage
1.Check spindle controller or power wire
2.Check spindle motor input power
3.Replace controller or motor
4.Connect encoder properly
