Ricoh SR5090, Field Service Manual

Page: 97 / 107

2.Replacement and Adjustment
93
Stapler Unit
Stapler Unit
1.
Remove the rear upper cover. ( Rear Upper Cover, Rear Lower Cover )
2.
Open the front door and push the stapler [A] to the rear side of the finisher.
3.
At the rear side, remove the screw circled in the photo below from the stapler [A].
4.
Push the stapler to the front side of the finisher.
5.
Remove the inner upper cover [A].
Be sure to open the paper guide [B] and release its catches on the cover.
6.
Remove the fixing bracket [A] of the stapler unit.
•
Opening the trailing edge of the bracket [B], pull it out to the front while releasing the catch of
the boss.