Ricoh SR5090, Field Service Manual

Page: 104 / 107

2.Replacement and Adjustment
100
Difference in
Alignment
Folding
Strength
Thickness of the
booklet
The amount of toner on the
fold
3mm (default) Strong Thin Acceptable
0mm Weak Thick Good
5.
Close the bracket after the adjustment.
6.
Reassemble the machine.
Adjusting the Folding Speed
You can adjust the thickness of the booklet by adjusting the moving speed of the flat fold booklet unit.
If you want to make the booklet thinner, set a slower speed. To make the booklet thicker, set a faster
speed.
1.
Enter the SP mode.
2.
Set the moving speed of the flat fold booklet unit for each paper size using SP6-114-001 to 010
(Fold Speed Adj.: 2K/3K FIN).
SP Setting Items Selection Default
Value
SP6-114-
001
Fold Speed Adj.: 2K/3K FIN:
A3 SEF
0: Standard
1: Middle
2: Low
•
[0: Standard] is faster than
[1: Middle].
0: Standard
SP6-114-
002
Fold Speed Adj.: 2K/3K FIN:
B4 SEF
SP6-114-
003
Fold Speed Adj.: 2K/3K FIN:
A4 SEF
SP6-114-
004
Fold Speed Adj.: 2K/3K FIN:
B5 SEF
SP6-114-
005
Fold Speed Adj.: 2K/3K FIN:
DLT SEF
SP6-114-
006
Fold Speed Adj.: 2K/3K FIN:
LG SEF
SP6-114-
007
Fold Speed Adj.: 2K/3K FIN:
LT SEF
SP6-114-
008
Fold Speed Adj.: 2K/3K FIN:
12"x18"
SP6-114-
009
Fold Speed Adj.: 2K/3K FIN:
8K SEF
SP6-114-
010
Fold Speed Adj.: 2K/3K FIN:
Other
3.
Exit the SP mode.