1.Detailed Descriptions
47
Center Folding and Saddle Shaping
The fold plate [C] center inserts the stack between the rollers [D]. Next, the side-to-side fold roller unit
[E] forms the saddle shape. The press fold motor drives both the fold plate [C] and the side-to-side fold
roller unit [E] so that they move together.
[A]: Fold Plate Cam HP Sensor
[B]: Fold Plate HP Sensor
Center Folding and Saddle Shaping
Stack folding and saddle shaping is explained below.
For saddle shaping only, see
When the fold plate [B] pushes the center of the stack between the fold transport rollers [E], the side-to-
side roller unit slides along the upper path [D]. Next, the fold plate [B] pushes the center of the stack
completely between the fold rollers. The upper part of the fold roller unit slides down onto the lower path
while pushing out switch plate 1 [F], . The top of the side-to-side roller unit is then lowered to press in
Summary of Contents for SR5090
