Ricoh SP C340DN, User Manual

Page: 75 / 128

Message Cause Solution
"Supply order has failed." The automatic supply order failed. The message indicates the printer
tried to order the supplies.
"This NetBIOS name is
already in use.(108/208)" The NetBIOS name specified for
the printer is already used by
another device on the network. Contact your network
administrator.
"The same IPv4 Address
already exists.(102/202)" The IPv4 address specified for the
printer is already used by another
device on the network. Contact your network
administrator.
"The selected job has
already been printed or
deleted." This message might appear if you
print or delete a job from Web
Image Monitor. Press Exit on the message screen.
" Toner is almost empty." The print cartridge is almost
empty. For details, see "Replacing the
Print Cartridge", Operating
Instructions.
"USB has a problem. /
Please call service." The printer has detected a USB
board failure. Turn the printer off, and then turn it
on again. If the problem persists,
contact your sales or service
representative.
"Values set for IPv6/
Gateway addresses are
invalid.(110/210)" The IPv6 address or gateway
address is invalid. Check the network settings.
"WPA Auth. incomplete.
(211)" WPA authentication could not be
completed. Contact your network
administrator.
When Messages Are Displayed
73