Ricoh SP 3600dn, User Manual

Page: 60 / 100

When You Cannot Print
Problem Cause Solution
Printing does not start. The power is off. For details about how to turn on
the main power switch, see
page 17 "Turning On/Off the
Power".
Printing does not start. The cause is displayed on the
screen of the control panel. Check the error message or
warning status on the display
panel, and then take the
required action. For details
about solutions, see page 54
"When Messages Are
Displayed".
Printing does not start. The interface cable is not
connected correctly. For details about how to
connect interface cables
correctly, see "Connecting the
Printer", Operating Instructions.
Printing does not start. The correct interface cable is
not being used. The type of interface cable to
use depends on the computer.
Be sure to use the correct one. If
the cable is damaged or worn,
replace it. For details about
interface cable, see
"Connecting the Printer",
Operating Instructions.
Printing does not start. The interface cable was
connected after the printer was
switched on. Connect the interface cable
before turning on the main
power switch.
[List / Test Print] is disabled. A mechanical error might have
occurred. Contact your service
representative.
If printing does not start, contact your service representative.
3. Troubleshooting
58