T
echnical
B
ulletin
PAGE: 1/1
Model:
Shepherd-P1
Date:
1-Jun-18
No.:
RJ093001
At machine installation:
Make sure not to curve the optical fiber cable sharply shown below. If you do it, the
fiber cable will be broken.
[2.Installation] [Installing the Cable Bearer (Right)]
If the cable is broken, following errors may occur.
118: Setting up optical fiber cable communication has failed.
119: Setting up channel mapping has failed.
Detail
DO NOT
curve the optical fiber cable within 65mm radius.
65mm
65mm
Subject: Caution for routing optical fiber cable
Prepared by:
Y.Kurohashi
From:
1st System Business Promotion Section, System
Business Department
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other (
)
Action required
Service manual revision
Retrofit information
Tier 2
