Ricoh SDC326 Operating Instructions Manual Download Page 62

Page: 62 / 107

Basic Procedure

Select

[

Duplex

]

, or

[

Duplex Thick

]

with the

keys.

Note

❒

To copy onto custom size paper, press the

[

Custom

]

key and select or enter

the size. For details,

⇒

P.45

“Copying onto custom size paper with the bypass

tray”

Press the

[

]

key.

Adjust the paper guides to the paper size.

Note

❒

Make sure that the paper guides match the paper size. If the paper guides
are not adjusted to the paper size properly, paper might be skewed or pa-
per misfeeds might occur.

Insert the paper into the bypass tray.

Note

❒

Make sure that front side (the side that has been copied onto) faces down.

Set your originals, then press the

{{{{

Start

}}}}

key.

Auto Reduce/Enlarge

The machine can select the proper reproduction ratio based on the selected pa-
per size and the original size.

Note

❒

Regarding functions that cannot be used together with this function,

⇒

P.105

“Combination Chart”

Copy305.tif

Trss116e.eps

Gcyhen1e.eps

Summary of Contents for SDC326












































































































Search results

Summary of Contents for SDC326

Reviews:

Related manuals for SDC326

Brands by name

Popular brands

Ricoh SDC326, Operating Instructions Manual

Search results

Summary of Contents for SDC326

Reviews:

Related manuals for SDC326

Brands by name

Popular brands