Ricoh SDC326 Operating Instructions Manual Download Page 30

Page: 30 / 107

Setting a Stack of Originals in the Document Feeder

Setting a Stack of Originals in the
Document Feeder

You can insert a stack of originals into the document feeder. These originals are
individually fed onto and removed from the exposure glass.

Note

❒

Some originals are unsuitable for the document feeder.

⇒

P.16

“Non-recom-

mended Originals for the Document Feeder”

❒

Do not press down or hold originals after inserting them.

❒

While originals are fed from the original table to the exposure glass, do not
pull them out.

❒

Do not lift the document feeder until the original has been completely fed out.

Correct any curl, fold, or crease in the originals before setting the originals.

Make sure the Insert Original indicator is lit and the exposure glass is clear
of originals.

Adjust the guide to the original size.

Trsr050e.eps

Summary of Contents for SDC326












































































































Search results

Summary of Contents for SDC326

Reviews:

Related manuals for SDC326

Brands by name

Popular brands

Ricoh SDC326, Operating Instructions Manual

Search results

Summary of Contents for SDC326

Reviews:

Related manuals for SDC326

Brands by name

Popular brands