PRINT JOBS AND PRESETS
•
Input
tray
You can select one of the plotter rolls listed. In addition, you can
also select from the "Automatic" or "Manual" options. The "Au-
tomatic" option means that the plotter itself selects a suitable
roll, which matches the prescribed format. The "Manual" option
means that you feed the print medium into the input tray your-
self.
•
Output
tray
You have two possible options to choose from for your plots on
the plotter: Front (output at the front) and rear (output at the re-
ar). If a folder is connected, the rear output is selected for the
folder. The standard setting is output at the front.
JobOptions
In addition to the "MainOptions", you have four other general
options that you can use to define the print job parameters:
•
Sample print
Activate this option if you want to check the quality of a print.
Only the first set of copies will then be printed. The print off of
further sets of copies is stopped, so that you can check the qua-
lity of the print off. Then you will be asked, whether you would
like to continue with the print out or abort.
•
Priority
This shows what priority the job has been given by the user:
Normal, High, Low, Wait, Immediately. You can change the pri-
ority given here or set it to the highest level.
•
Delete after plot
If you activate this option, the job is deleted again by RW-480
PLOTBASE immediately after printing.
RW-480 CLIENTS 141
Summary of Contents for RW-480 PLOTCLIENT WIN
