Ricoh RW-480 PLOTCLIENT WIN, Software Manual

Page: 117 / 153

PREPARE PRINT JOBS
PLOTCLIENT WEB.
• Language
Choose the language from the list field, which you want to use
in this program. The language used by the administrator in the
configuration menu is preset.
• Measure
Here you can preset the unit of measurement that is to apply for
all work with RW-480 PLOTCLIENT WEB. You can choose be-
tween "Millimeters" and "Inches".
• Change password
You can change your password, if the administrator permits ed-
iting. Firs enter your old password, enter a new password in the
field below and confirm the new password by entering it again
in the bottom field.
•
Delete after plot
The job is deleted following successful plotting.
• Distribution list
Enter which persons are to obtain a copy of the job.
•
Job flag sheet
Activate the "Print JobFlagsheet" field by clicking on the check
box, if you want a cover sheet to be printed with all the informa-
tion in an overview. You can enter your own additional informa-
tion in the text field, which is also printed on the cover sheet.
Also, you can enter further information in the "Notes" field. You
should not use the following characters: " " < > ; : \
• Copies
Enter how many copies are to be printed.
• Collate
Activate this field if the plot job is to be printed out collated. Col-
lated means that the entries of an order are printed out as fol-
lows when several copies are required:
E.g. you have the entries 1, 2 and 3. Three copies of each are
to be produced. If you choose "1-2/1-2" from the list field, the
print outs are in the sequence 1, 2, 3 - 1, 2, 3 - 1, 2, 3. If the
printout is not sorted, the complete number of entries is printed
RW-480 CLIENTS 117