Ricoh Pro C900s, Operating Instructions Manual

Page: 86 / 96

• Before loading envelopes, press down on them to release excess air and flatten out their edges. Make
sure that any curled envelopes are fully flattened before you load them.
• Humidity levels of over 50% can cause envelopes to come out creased or misprinted.
• Certain types of envelope might come out creased, dirtied, or misprinted. If the print image contains
areas of solid black, lines might appear where the envelopes overlapped.
• When printing on envelopes thicker than 127g/m
2
(33.7 lb), do not use SP1-906-001-2: Back curl
(strong) or SP1-906-001-5: Face curl (strong) for Paper Path Selection of Adjustment Settings for
Operators.
• Keep envelopes stored in sealed plastic bags and remove only the quantity needed. Do not add
envelopes during printing, as this might cause misfeeds.
4. Appendix
84
4