Ricoh PRO C751 Troubleshooting Manual Download Page 43

Page: 43 / 76

When B Is Displayed

CDN029

Turn knobs B3 and
B4 counterclockwise.

Open the clear
cover.

Return the unit to its original position.

Open both front
covers.

Turn lever B1 to
the left.

Turn knob B2
clockwise, and then
remove misfed paper.

Open B7 guide board. If there is any misfed
paper, remove it.

Close B7 guide board.

Turn knob B6
counterclockwise,
and then remove
misfed paper.

Remove misfed paper.

Turn lever B5 to the
left, and then pull
out the unit.

Close the clear cover.

Return lever B5 to its original position.
Close both front covers.

Return lever B1 to its
original position.

When C Is Displayed

CDN030

Turn lever C1 to the
left, and then pull
out the unit.

Open both front
covers.

Remove misfed paper.

Return the unit to its original position.
Return lever C1 to its original position.
Close both front covers.

Removing Jammed Paper

Summary of Contents for PRO C751













































































Search results

Summary of Contents for PRO C751

Reviews:

Related manuals for PRO C751

Brands by name

Popular brands

Ricoh PRO C751, Troubleshooting Manual

Search results

Summary of Contents for PRO C751

Reviews:

Related manuals for PRO C751

Brands by name

Popular brands