Ricoh PRO C751, Troubleshooting Manual

Page: 29 / 76

When the Output Z-folded Paper Is Less than
the Stack Capacity
When you use the multi-folding unit, Finisher SR5030, or Booklet Finisher SR5040 to print Z-folded
paper, the machine might indicate that the output tray is full even though the output paper on the tray is
less than the stack capacity. If this occurs, use the Z-fold support tray.
Finisher SR5030 or Booklet Finisher SR5040
1. Press the [Suspend/Resume] key.
CDN007
2. Remove the prints.
3. Set the Z-fold support tray for the finisher shift tray.
Attach the Z-fold support tray by inserting the two protrusions on its underside into the holes on the
finisher shift tray.
CDN010
4. Press the [Suspend/Resume] key to restart the print.
When the Output Z-folded Paper Is Less than the Stack Capacity
27
1