Ricoh Pro 8300S, Troubleshooting Manual, Page: 206 / 963

1.SC Codes
198
 669-15: EEPROM Data Write: Communication Timeout Error
 669-16: EEPROM Data Write: Operation Stopped Error
 669-17: EEPROM Data Write: Buffer Full
 669-18: EEPROM Data Write: No Error Code
 669-19: EEPROM Data Read: ID Error
 669-20: EEPROM Data Read: Channel Error
 669-21: EEPROM Data Read: Device Error
 669-22: EEPROM Data Read: Communication Abort
 669-23: EEPROM Data Read: Communication Timeout Error
 669-24: EEPROM Data Read: Operation Stopped Error
 669-25: EEPROM Data Read: Buffer Full
 669-26: EEPROM Data Read: No Error Code
 669-27: EEPROM Device Detection: ID Error
 669-28: EEPROM Device Detection: Channel Error
 669-29: EEPROM Device Detection: Device Error
 669-30: EEPROM Device Detection: Communication Abort Error
 669-31: EEPROM Device Detection: Communication Timeout Error
 669-32: EEPROM Device Detection: Operation Stopped Error
 669-33: EEPROM Device Detection: Buffer Full
 669-34: EEPROM Device Detection: No Error Code
 669-36: SRAM Expansion Verify Error
 669-37: Malfunction Detection Error
Pattern
D
Error Condition
The CPU of the BiCU detects an error during communication with the EEPROM on the BiCU.
Major Cause
1. EEPROM is not connected properly.
2. EEPROM is defective.
3. BiCU is defective.
Solution
1. Remove the EEPROM from the IC socket, and then set it again.
*If the EEPROM lead is bent or it was set in the reverse (wrong) direction, then it would be
damaged.
2. Replace the EEPROM.
3. Replace the BiCU.