Ricoh Priport VT 6000, Manual

Page: 169 / 274

Adding Staples
The Staple (
i
) and "H" indicators blink when the optional sorter stapler
runs out of staples. When your machine is equipped with the 2 sorter
staplers, A or B is indicated at the end of second line of the guidance
display. If A is indicated, the sorter stapler next to the main frame has run
out of staples.
❐ Do not remove the staple cartridge from the stapler except for adding staples.
❐ Do not remove staple plate. It should remain in the stapler unit when you remove
the empty staple cartridge.
1
Open the stapler unit cover.
2
Lift the empty staple cartridge a
little and remove it from the sta-
pler unit.
3
Set the new staple cartridge and
push it until it clicks.
❐
If any staples extend from the mouth
of the new staple cartridge, push
them back into the cartridge.
REPLENISHING SUPPLIES
160